How do I install the HINKLEY Tall ADA Vertical Integrated LED Bath Light? (HINKLEY Tall ADA Vertical Integrated LED Bath Light Instruction Manual)

Answer

manuals.plus

Mar 20, 2025 - 12:10 AM


To install the HINKLEY 50871 16 Inch Tall ADA Vertical Integrated LED Bath Light, follow these steps:



1. Start by removing the mounting plate (A) from the backplate (C) by unscrewing the screws (E) located on the side of the backplate.



2. Attach the mounting bracket (A) to the junction box (J) using two 8-32 screws (not provided). Make sure the threaded holes are on the side and ensure the plate is plumb by using a level across the top. Tighten the screws to secure the mounting plate.



3. Make all necessary wiring connections by following the instruction sheet (IS-18) provided. Ensure that you read the wiring and grounding instructions (I.S. 18) and any additional directions. Turn off the power supply during installation. If new wiring is required, consult a qualified electrician or local authorities for code requirements.



4. After making all electrical connections, slip the backplate (C) over the mounting strap (A) and align the holes in the side of the backplate with the threaded holes on the side of the mounting strap. Thread in the screws (E) removed earlier to secure the backplate to the mounting strap.



5. Prior to attaching the fixture to the wall, it is recommended to install the glass. To do this, remove one end cap (1) from one end of the crossbar (A) by removing the  xxxx  (2) located on the back of the crossbar. Slide the glass (3) into the grooves (C) in the crossbar and carefully slide it into the crossbar until it touches the end cap. Slip the end cap (1) back onto the end of the crossbar, aligning the hole in the end cap tab (T) with the threaded hole (H) in the back of the crossbar. Thread the  xxxx  (2) back into place to secure the end cap and glass.



6. Finally, follow the mounting instructions supplied to install the fixture. Ensure that you read the wiring and grounding instructions (IS 18) and any additional directions. Turn off the power supply during installation. If new wiring is required, consult a qualified electrician or local authorities for code requirements.



Please note that this answer is based on the provided instruction manual for the HINKLEY 50871 16 Inch Tall ADA Vertical Integrated LED Bath Light. It is always recommended to refer to the specific product manual for accurate and detailed installation instructions.