User Manual Q&AAnswer
Mar 19, 2025 - 12:33 PM
To disassemble the Acer CB272 display, please follow the assembly and disassembly procedures provided in the user manual. Here is a step-by-step guide:
1. Pull the base and stand assembly out.
2. Unscrew four screws.
3. Separate hooks between MID_FRAME and R/C.
4. Pull up the Rear Cover and pull out all connectors.
5. Unscrew screws on the main shielding and disassemble AL tape.
6. Separate the speaker from MID_FRAME and LVDS & Backlight FFC from LCM.
7. Unscrew two hex nuts and seven screws and remove the main board PCBA from the main shielding.
8. Unscrew eleven screws and separate MID FRAME and LCM.
9. Separate gasket and lens from MID frame.
10. Unscrew one xxxx and disassemble the USB board from the rear cover and separate USB & cable.
11. Unscrew two screws and disassemble the keyboard from the rear cover and separate navi key & cable.
12. Separate wall-mount BKT and display key from the rear cover.
13. Unscrew two screws and separate the base and stand assembly.
Please note that disassembling the display should only be done by qualified service providers who have the necessary knowledge, experience, and appropriate product training. It is important to follow the safety precautions mentioned in the user manual to avoid any personal injury or damage to the equipment.
Add New Comment