User Manual Q&AAnswer
Mar 19, 2025 - 12:28 PM
To convert the evonicfires ELECTRA 1500 British Electric Fires to GF/GF2/GF3 configuration, follow these steps:
1. Unscrew and remove the plaster kits from the side/s of the appliance.
2. xxxx in the side panel/s on one or both sides, depending on the desired configuration (GF, GF2, or GF3).
3. If you want to install side glass panels, unscrew and remove the top and bottom glass retainer panels.
4. Slide in the side glass pieces.
5. If you want to install a front glass panel, use a glass sucker to apply the Suction Lifter to the glass. Position the bottom edge of the glass first, then pivot the glass into the appliance. If you don't have a glass sucker, carefully hold the glass on either end and follow the same process. Make sure to have someone assist you to ensure the glass is carefully supported at all times.
6. Replace the top and bottom glass retainers.
Please refer to the evonicfires ELECTRA 1500 British Electric Fires Instruction Manual for more detailed instructions and illustrations.
Add New Comment