Answer

Mar 19, 2025 - 11:55 AM
To adjust the pressure on the PowerPress HPM-1740 heat press machine, follow these steps:
1. Open the device by lifting the pressure lever and slide out the base using its handle.
2. Lower the platen using the pressure lever.
3. Locate the adjustment xxxx over the platen.
4. To increase the pressure, turn the adjustment xxxx clockwise.
5. To reduce the pressure, turn the adjustment xxxx counterclockwise.
6. Adjust the pressure as needed for your specific application.
It is important to note that the pressure should be adjusted based on the material and design being used. Too much pressure can result in burnt or blurry images, while too little pressure can result in faded or colorless images. Experiment with different pressure settings to achieve the desired results.
Add New Comment