User Manual Q&AAnswer
Mar 19, 2025 - 08:52 AM
To reset the stopwatch hands to the "0" position on your INVICTA VD53 Watch, follow these steps:
1. Check if all the chronograph hands (second and minute) are already at the "0" (12 o'clock) position. If they are not, proceed to the next step.
2. If the stopwatch is currently in use, press the buttons in the following order to reset it: A > B. After resetting, check if the hands return to the "0" position.
3. If the stopwatch is stopped, simply press the B button to reset the hands to the "0" position.
4. If the split time is displayed, press the buttons in the following order to reset the hands: B > A > B.
5. If any of the stopwatch hands are not in the "0" position, press either button A or B to reset all the stopwatch hands to the "0" position. The minute hand will move correspondingly with the second hand.
6. If you want the hands to move quickly, keep the respective buttons pressed.
7. Finally, pull the crown out to position 2 and then push it back to the normal position.
By following these steps, you should be able to reset the stopwatch hands to the "0" position on your INVICTA VD53 Watch.
Add New Comment