User Manual Q&AAnswer
Mar 19, 2025 - 08:47 AM
To connect the AC7-HP+ High-Pressure Water Manometer to your system, follow these steps:
1. Identify the red and blue connection tubes on the manometer. The red tube is for connecting to the red connector, and the blue tube is for connecting to the blue connector.
2. Connect the red connection tube to the red connector on the manometer. This connector is equipped with internal strainers to protect the sensor unit from small dirt particles. It is important to note that blocked strainers can affect performance and reduce accuracy, so ensure they are clean.
3. Connect the blue connection tube to the blue connector on the manometer.
4. Use the securing ring provided with the manometer to suspend it from pipework or a similar structure while taking readings. This helps to keep the manometer stable during measurements.
Please note that the AC7-HP+ High-Pressure Water Manometer has a maximum total system pressure of 20 BAR. Ensure that your system's pressure does not exceed this limit.
For more detailed instructions and information, please refer to the user guide provided by COMDRONIC Ltd for the AC7-HP+ High-Pressure Water Manometer.
Add New Comment