User Manual Q&AAnswer
Mar 19, 2025 - 07:57 AM
To install the Progress Lighting P400047-031 Briarwood Textured Black Four Light Chandelier, follow these steps:
1. Start by turning off the power to the circuit at the breaker box to ensure safety during installation.
2. Remove the existing light fixture, if any, from the ceiling.
3. Attach the mounting plate included with the chandelier to the outlet box in the ceiling using the provided screws. Make sure the plate is securely fastened.
4. Connect the chandelier wires to the corresponding wires in the outlet box. Use wire nuts to secure the connections and ensure proper insulation.
5. If using the chain for mounting, attach one end of the chain to the loop on the top of the chandelier. Hang the other end of the chain on the ceiling hook or mounting point.
6. If using the stem for mounting, select the desired length of stem (6" or 12") and attach it to the top of the chandelier. Secure the other end of the stem to the mounting plate using the provided screws.
7. Adjust the height of the chandelier by adjusting the length of the chain or stem.
8. Attach the canopy to the mounting plate, covering the outlet box. Secure it using the provided screws.
9. Install the desired light bulbs in the four medium base (E26) sockets. The chandelier supports incandescent bulbs with a maximum wattage of 100 watts per socket or LED bulbs with a maximum wattage of 17.5 watts per socket. Ensure the bulbs are fully dimmable if you plan to use a dimmer switch.
10. Turn on the power at the breaker box and test the chandelier to ensure it is functioning properly.
Please note that this answer is based on the information provided in the user manual for the Progress Lighting P400047-031 Briarwood Textured Black Four Light Chandelier. For more detailed instructions and safety guidelines, it is recommended to refer to the user manual that came with the product.
Add New Comment