User Manual Q&AAnswer
Mar 19, 2025 - 03:11 AM
To reverse the door on your Danby DBM187E1WDB refrigerator, please follow these steps:
1. Ensure that the appliance is unplugged before starting the door reversal process.
2. Remove the cover plate on the top left side of the cabinet. Also, remove the hinge cover and the upper hinge from the top right side of the cabinet.
3. Lift the refrigerator door upwards to remove it from the cabinet. Remove the hinge sleeve from the top right side of the door and install it on the top left side of the door. Remove the right door stopper from the bottom right side of the door. Install the left door stopper from the accessory bag on the bottom left side of the door.
4. Remove the center hinge and the center hinge pin using a screwdriver.
5. Turn the center hinge over and install the hinge pin on the other side.
6. Install the center hinge on the left side of the cabinet.
7. Install the refrigerator door on the center hinge. Install the upper left hinge found in the accessory bag on the top left side of the cabinet. Ensure that the rubber gasket is making a good seal with the cabinet all the way around before tightening the upper hinge screws. Install the hinge cover and cover plate found in the accessory bag.
8. Move the refrigerator door handle to the right side of the cabinet.
Please note that if the appliance is placed on its back or side during transportation, it must be allowed to remain upright for 6 hours before plugging it in to avoid damage to internal components.
Add New Comment