Answer

Mar 19, 2025 - 02:59 AM
To set the desired current range using the DIP switch on the rutec 80790-V2 DALI-2 Dimm-Actor, please follow these steps:
1. Refer to the "DIP switches setting options" section in the instruction manual.
2. Locate the DIP switch on the dimming actuator.
3. The DIP switch has multiple positions labeled with different current values (mA) and voltage values (V).
4. Choose the desired current range based on your LED requirements and the available options listed in the manual.
5. Use a small tool, such as a screwdriver, to carefully move the DIP switch to the corresponding position for the desired current range.
6. Ensure that the DIP switch is securely in place.
7. Once the DIP switch is set, you can proceed with connecting the LEDs to the dimming actuator.
Note: It is important to refer to the instruction manual and select the appropriate current range to ensure proper functionality and compatibility with your LED setup.
Add New Comment