Answer

Mar 19, 2025 - 02:55 AM
To switch on and set the temperature on the ProBreeze PB-H10 1500W Mini Oscillating Ceramic Space Heater, follow these steps:
1. Insert the plug into the power socket.
2. Turn the power/fan only mode control dial to the desired mode:
- FAN: Fan only mode.
- LOW: Low power mode (750W).
- HIGH: High power mode (1500W).
3. Turn the temperature control dial until you hear a click. This will turn the heater on.
4. Continue turning the temperature dial to your desired temperature. The temperature control dial acts as a thermostat.
5. Once the room reaches the desired temperature, the heater will switch off. If the room temperature drops below the desired temperature, the heater will turn on again.
6. To activate the oscillation function in your chosen mode, turn the oscillation mode button to the on (I) position.
Remember to turn off the heater by turning the power/fan only control dial to the OFF position, turning the temperature control dial counterclockwise to the lowest temperature setting, and removing the plug from the power socket when not in use.
Please refer to the instruction manual for additional safety precautions and guidelines for proper usage, cleaning, and storage of the heater.
Add New Comment