Answer

Mar 18, 2025 - 11:31 PM
To install the EATON AG II IT DN0xx Series Surge Protection and Filtering device, please follow these steps:
1. Verify the system voltage and configuration on the label: Before installation, ensure that the device's voltage and configuration are suitable for your application.
2. Safety precautions: Installation and maintenance should only be performed by qualified personnel to avoid the risk of electric shock. Always follow safety rules and regulations applicable to devices connected to power lines.
3. Check device integrity: Before installation, inspect the device for any visible damage. If there is any damage, do not install the product.
4. Limits and warranty: The device should be used within the limits specified in the installation instructions. Opening or tampering with the device will invalidate the warranty.
5. Match the device type and voltage: Ensure that the new device is of the same type and voltage as the one being replaced.
For more detailed instructions and diagrams, please refer to the EATON AG II IT DN0xx Series Surge Protection and Filtering Instruction Manual provided by Eaton Corporation. If you have any further questions or need assistance, you can contact the Eaton Technical Resource Center at 1-800-809-2772, option 4, option 2, or email spd@eaton.com. Additional information can also be found at eaton.com/aegis.
Add New Comment