User Manual Q&AAnswer
Mar 18, 2025 - 11:29 PM
To select the CPU speed on the SOLTEK SL-56F1 Slot 1 Motherboard, you need to refer to the CPU speed selection table in the user guide. Here are the steps:
1. Identify your CPU model and its corresponding clock speed in the table.
2. Locate the SW1 jumper on the motherboard.
3. Set the jumper according to the desired CPU speed by closing the corresponding pins as indicated in the table.
4. Make sure to power off the system before changing the jumper settings.
5. Once the jumper is set, power on the system and the CPU will run at the selected speed.
Note: The table provides different settings for different CPU models and clock speeds. Make sure to select the correct settings for your specific CPU model.
Add New Comment