User Manual Q&AAnswer
Mar 18, 2025 - 11:26 PM
To configure the memory on the PROCOMP B587 1.1 SOCKET 7 SIMM SDRAM Mainboard, you need to refer to the "SIMM CONFIGURATION" and "DIMM CONFIGURATION" sections in the user guide. These sections provide information on the supported memory sizes and the corresponding configuration for each size.
For SIMM configuration, you can refer to the table under the "SIMM CONFIGURATION" section. It lists the different memory sizes and the required SIMM modules for each bank. For example, if you want to install 16MB of memory, you will need two 1M x 36 SIMM modules for Bank 0.
For DIMM configuration, you can refer to the table under the "DIMM CONFIGURATION" section. It lists the different memory sizes and the required DIMM modules for each bank. For example, if you want to install 16MB of memory, you will need one 1M x 64 DIMM module for Bank 2.
Make sure to follow the instructions and install the memory modules correctly in the designated slots on the mainboard.
Note: It is always recommended to consult the user guide or seek professional assistance when configuring hardware components to ensure proper installation and compatibility.
Add New Comment