User Manual Q&AAnswer
Mar 18, 2025 - 11:20 PM
To install the F150LEDs 2015 - 2020 CREE LED Fog Bulbs, please follow the step-by-step instructions provided in the installation guide:
Step 1: Reach under the bumper and remove the OEM Fog light bulb by turning it counterclockwise. Disconnect the factory fog light harness for the OEM fog light bulb.
Step 2: Connect the factory harness to the ballast included in the kit. Then, connect the ballast to the MKV Fog light bulb.
Step 3: Install the MKV Fog light bulb into the fog housing. Align the tabs on the bulb with the tabs in the housing and turn the bulb clockwise to lock it into place.
Step 4: Use the provided zip ties to secure the ballast in a location where it will not touch any other wires or plastic. It is important to prevent the unit from getting hot.
Step 5: Repeat the above steps for the other side of the truck.
If you have any further questions or need additional support, you can reach out to F150LEDs directly via text at 706-214-2618, visit their website at www.F150LEDs.com for live chat, or email CustomerSupport@F150LEDs.com.
Add New Comment