User Manual Q&AAnswer
Mar 18, 2025 - 11:18 PM
To play a CD on the Denver TCU-211 Portable Stereo CD Boombox, follow these steps:
1. Make sure the appliance is connected to a power source either through an electrical outlet or with batteries.
2. Open the disc compartment lid by flipping the carrying handle back.
3. Set the function switch (labeled CD/LINE IN OFF/FM/USB) to the "CD/LINE IN" position.
4. Place an audio CD with its label side upward in the CD compartment and close the lid.
5. The total number of tracks on the CD will appear in the LED display after a few seconds.
6. The first track will start playing automatically. To pause playback, press the "PLAY/PAUSE" button. Press it again to resume playback.
7. To stop playback, press the "STOP" button.
8. To skip to the next track, press the "FWD/NEXT" button. To go back to the previous track, press the "REV/BACK" button.
9. To repeat a track, press the "REPEAT" button once. The repeat indicator will flash continuously. To repeat the entire disc, press the "REPEAT" button twice. To cancel the repeat function, press the "REPEAT" button until the lighted repeat indicator turns off.
10. If you want to program specific tracks to play in a certain order, set the appliance to "STOP" mode and press the "PROG/FOLDER+" button. Use the "FWD/NEXT" or "REV/BACK" button to select your desired tracks and press the "PROG/FOLDER+" button to confirm and save them to memory. You can program up to 20 CD tracks or 99 MP3 tracks in any desired order. Press the "PLAY/PAUSE" button to start playback of the programmed tracks.
11. To delete the program and return to normal mode, press the "STOP" button twice or open the disc compartment lid.
Please refer to the instruction manual for more detailed information and troubleshooting tips.
Add New Comment