User Manual Q&AAnswer
Mar 18, 2025 - 11:01 PM
To assemble the ANGELES HOME HW63-8CK-994WH Wood Rectangle End Table 3-Tier Side Table, please follow the steps below:
1. Start by identifying the parts included in the package. The parts should include the tabletop, three shelves, four legs, screws, and an Allen wrench.
2. Begin by attaching the legs to the tabletop. Each leg has pre-drilled holes that align with the corresponding holes on the tabletop. Insert the screws through the holes and tighten them using the Allen wrench. Repeat this step for all four legs.
3. Once the legs are securely attached, you can proceed to attach the three shelves. Each shelf has pre-drilled holes on the sides. Align the holes on the shelves with the holes on the legs and insert the screws. Use the Allen wrench to tighten the screws. Make sure the shelves are level and secure before moving on to the next step.
4. After all the shelves are attached, double-check that all screws are tightened properly to ensure stability.
5. Once the assembly is complete, carefully flip the table over to its upright position.
6. Congratulations! Your ANGELES HOME HW63-8CK-994WH Wood Rectangle End Table 3-Tier Side Table is now ready to be used.
Please note that this is a general guide, and it's always recommended to refer to the specific instructions provided in the product manual for accurate assembly steps and any additional information.
Add New Comment