User Manual Q&AAnswer
Mar 18, 2025 - 11:00 PM
To assemble your GESHENG S3 Electric Folding Fat Bike, please follow the instructions provided in the user manual. Here is a step-by-step guide:
1. Attach the handlebar subassembly: Stand the main body of the e-bike on the kickstand. Stand up and lock the steering column at the front of the main body frame. Insert the stem of the handlebar subassembly into it and tighten from the top using the quick lock.
2. Attach the front wheel fender and the front light: Place the front light and the front fender within the fork of the steering column. Attach the supports (if applicable) to the base of the fork using the small bolts provided. Use the multi-tools to tighten all three points.
3. Attach the front wheel and adjust the front brake: Remove the protective bar from the front fork. Place the front wheel within the fork and the brake disc within the brake block. Seat the axial stem properly within the receptacles at the tips of the fork and tighten the nuts with the multi-tools. Make sure the front wheel moves freely and does not wobble. Test the brake by lifting the front of the e-bike and setting the wheel in motion, then apply the brake at the handlebar to stop it. Adjust the brake clearance if necessary.
4. Install the seat and pedals: Insert the pedestal stem of the seat into the seat column of the main body frame and tighten using the built-in lever. Attach a pedal on each side of the crank, making sure to distinguish between the left and right pedals. Tighten with the multi-tools.
5. Inflate the tires to the proper pressure.
For more detailed instructions and illustrations, please refer to the user manual provided with your GESHENG S3 Electric Folding Fat Bike.
Add New Comment