User Manual Q&AAnswer
Mar 18, 2025 - 10:49 PM
To change the batteries in the ANSMANN M900P LED Torch, follow these steps:
1. Make sure the torch is switched off before changing the batteries.
2. Remove the old batteries from the battery compartment.
3. Always change all of the batteries at the same time.
4. Insert the new batteries into the battery holder, following the polarity markings (+/-) in the battery compartment.
5. Take care not to short-circuit the contacts and keep them away from any metal or damp objects.
6. Close the battery compartment securely.
It is important to note that you should never attempt to recharge non-rechargeable batteries. Also, do not mix new and used batteries together. Use only high-quality batteries of the same type. Rechargeable batteries and high-current batteries are not recommended for use with this torch. If the torch will not be used for an extended period of time, it is advisable to remove the batteries to avoid damage. Empty batteries should be properly disposed of according to national regulations.
Please refer to the ANSMANN M900P Bright 930 Lumen 10W LED Torch User Manual for more detailed instructions and safety information.
Add New Comment