Answer

Mar 18, 2025 - 10:39 PM

To assemble the StyleWell CRF-007-WH 42 Inch White 3 Drawer Table with Shelf, follow the instructions provided in the user guide. Here is a step-by-step guide:
1. Insert wood dowels (CC) into panels (J), then assemble panels (J) and panels (K/L) by rotating the flat head screws (FF).
2. Insert the panel (M) into the slot correctly.
3. Assemble panel (J) and panel (N) by rotating the flat head screws (FF).
4. xxxx bolts (EE) into the panel (O).
5. Insert wood dowels (CC) into panels (K/L/N), then rotate the cam locks (DD) tight to assemble panels (K/L/N) and panel (O).
For the upper two drawers:
1. Assemble panel (P) and panels (Q/R) by rotating the flat head screws (FF).
2. Insert the panel (M) into the slot correctly.
3. Assemble panel (P) and panel (N) by rotating the flat head screws (FF).
4. xxxx bolts (EE) into the panel (S).
5. Insert wood dowels (CC) into the panel (N), then rotate the cam locks (DD) tight to assemble panels (N/Q/R) and panel (S).
For the side panels:
1. xxxx big cam lock bolts (BB) into the side panels (B/C). Then install panels (H/G) by tightening the screws (GG).
2. Connect panels in alignment with holes as illustrated in the manual.
3. Lock the panels using big cam locks (AA) and screws (GG) as shown.
For the top and back panels:
1. xxxx bolts (BB) into panel A as shown.
2. Align and join the panel (A) to pre-drilled holes as shown.
3. Tighten the big cam locks (AA) as shown.
4. Insert the screws (HH) into the back panel (I) through the provided holes.
To insert the drawers, follow the instructions in the manual. Make sure the slide piece is at the front end of the glide when installing the drawer into the body. To remove the drawer, tip up and press down the safety release tab.
If you encounter any issues or have further questions, you can contact Customer Service at the provided phone number for assistance.
Add New Comment