User Manual Q&AAnswer
Mar 18, 2025 - 10:35 PM
To install the LED Q290 Ceiling LED Light, please follow the steps below:
1. Cut off the power supply before starting the installation process.
2. Unscrew the diffuser in an anticlockwise direction to remove it.
3. Vertically remove the diffuser and PCBA.
4. Thread the input cable through the rubber plug to the fixture.
5. Connect the L (live) and N (neutral) wires according to the provided wiring diagram.
6. Knock the rawl plugs into the pre-drilled holes on the ceiling or wall.
7. Wear plastic washers on self-tapping screws and tighten them to fix the fixture on the ceiling or wall.
8. Install the cable clip.
9. Connect the DC cable.
10. Mount the diffuser onto the base using screws.
11. Install the plastic plugs to hide the screws.
Please note that it is important to have the installation carried out by professional technicians and to cut off the power supply before installation.
Add New Comment