User Manual Q&AAnswer
Mar 18, 2025 - 10:34 PM
To install the LED Quanta Q290 Ceiling LED Light, please follow the instructions provided in the manual:
1. Unscrew the diffuser anticlockwise. Vertically remove the diffuser and PCBA.
2. Cut off the power. Thread the input cable through the rubber plug to the fixture. Connect the L, N wire referring to the wiring diagram.
3. Knock the rawl plugs into the pre-drilled holes on the ceiling/wall.
4. Wear plastic washers on self-tapping screws and tighten them to fix the fixture on the ceiling/wall.
5. Contact an authorized technical service center for any repairs possibly required, use only original spare parts.
6. Do not touch the LED while installing or maintaining.
7. Sealing the entrance hole with glue after installation is needed.
8. The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
Please refer to the manual for detailed illustrations and further instructions on the installation process.
Add New Comment