User Manual Q&AAnswer
Mar 18, 2025 - 10:33 PM
To connect your Lorex N845 4K Fusion Wired NVR System to your network, follow these steps:
Step 1: Test your cameras prior to selecting a permanent mounting location.
Step 2: Wired Option 1: Connect your wired camera directly to your recorder's PoE port using the Ethernet extension cable.
Step 3: Wired Option 2: Connect your wired camera to a PoE switch on your network using the Ethernet extension cable. Ensure your switch is connected to the same network as your recorder.
Step 4: Connect your recorder to your Wi-Fi router using the included Ethernet cable.
Step 5: Connect your mouse to the USB port on your recorder using the included USB mouse. If you need to copy events or perform a firmware update, connect a USB flash drive.
Step 6: Connect your recorder to your TV using the included HDMI cable. The HDMI port supports up to 4K resolution, and the VGA port supports up to 1080p.
Step 7: Connect the included power adapter to your recorder and a power outlet. Once your recorder has powered on, complete the Lorex Setup Wizard.
For more detailed instructions and visuals, please refer to the Lorex N845 4K Fusion Wired NVR System User Guide.
Add New Comment