User Manual Q&AAnswer
Mar 18, 2025 - 10:24 PM
To level the bed on the Ender-3 Pro 3D printer, follow these steps:
1. Prepare the printer by selecting "Auto Home" from the menu. Wait for the nozzle to move to the left/front of the platform.
2. Select "Disable Steppers" to close the stepper drive and release the motor.
3. Move the nozzle to the front/left leveling xxxx and adjust the platform height by turning the xxxx underneath. Use a piece of A4 paper (standard printer paper) to assist with the adjustment, making sure that the nozzle lightly scratches the paper.
4. Complete the adjustment of the xxxx on all four corners of the bed.
5. Repeat the above steps 1-4 if necessary to ensure proper leveling.
For more detailed instructions and illustrations, please refer to the "Bed Levelling" section in the Ender-3 Pro Series 3D Printer Instruction Manual.
Add New Comment