Answer

Mar 18, 2025 - 10:21 PM
To install the PROGRESS LIGHTING P2913-15 Heart 1-Light Polished Chrome Farmhouse Vanity Light, please follow the instructions provided in the instruction manual. Here is a step-by-step guide:
1. Start by turning off the power to the circuit you will be working on at the main electrical panel.
2. Remove the existing light fixture, if applicable, by unscrewing the mounting screws and disconnecting the wires.
3. Hold the mounting plate against the wall or ceiling in the desired location and mark the positions of the mounting holes.
4. Drill pilot holes at the marked positions and secure the mounting plate using the provided screws.
5. Connect the electrical wires from the junction box to the wires on the fixture using wire connectors. Make sure to match the corresponding colors (e.g., black to black, white to white, and green or bare copper to the grounding wire).
6. Attach the fixture to the mounting plate by aligning the holes on the fixture with the screws on the mounting plate. Secure the fixture in place using the provided screws.
7. Install the glass shade by gently twisting it into place.
8. Restore power to the circuit and test the light fixture to ensure it is functioning properly.
Please note that it is always recommended to consult a licensed electrician if you are unsure about any aspect of the installation process or if you have specific electrical requirements in your area.
Add New Comment