User Manual Q&AAnswer
Mar 18, 2025 - 10:15 PM
To reset the VEVOR SHC330 Motorized TV Lift, you have two options:
1. Prompt Reset: When the manual controller shows "RST", the whole system needs to be reset manually. Press the "down button" and don't let go. The column will begin to shorten slowly. If you observe any other damages during operation, release the button. After a short time, the column will rise 5-10mm before reaching the lowest point. Once it has reached the lowest point, rise a small distance and release the button. When the "RST" disappears from the manual controller, the reset is complete.
2. Line Reset: When the manual controller shows the minimum height (for example, for a system with a reset height of 60cm), press and hold the "down button" for more than 5 seconds. When the manual controller shows "RST", release the button and start the reset process. Follow the same steps as mentioned in the prompt reset method.
It is important to note that resetting the system should be done carefully, ensuring there are no people or objects under the table that may cause harm.
Add New Comment