How do I install the Progress Lighting Polished Chrome Traditional Vanity Light? (Progress Lighting Polished Chrome Traditional Vanity Light User Manual)

Answer

manuals.plus

Mar 18, 2025 - 10:10 PM

To install the Progress Lighting P2018-15 Polished Chrome Traditional Vanity Light, please follow these steps:

1. Before starting the installation, make sure to turn off the power supply to the existing light fixture at the circuit breaker.

2. Remove the existing light fixture by unscrewing the mounting screws and disconnecting the electrical wires.

3. Hold the backplate of the new vanity light against the wall or mirror surface where you want to install it. Use a pencil to mark the positions of the mounting holes on the wall.

4. Drill pilot holes at the marked positions using an appropriate drill bit size for the wall material.

5. Insert wall anchors into the pilot holes if necessary, depending on the wall material and weight of the fixture.

6. Align the backplate with the pilot holes and secure it to the wall using the provided screws.

7. Connect the electrical wires from the wall to the corresponding wires on the vanity light fixture. Match the black (hot) wire with the black or gold wire on the fixture, and the white (neutral) wire with the white or silver wire. Use wire connectors or twist the wires together and secure them with electrical tape.

8. Carefully attach the etched glass shade to the fixture by aligning the notches or screws on the shade with the corresponding slots or holes on the fixture. Gently tighten any screws or fasteners to secure the shade in place.

9. Turn on the power supply at the circuit breaker and test the vanity light to ensure it is functioning properly.

Please note that these instructions are a general guide, and it is always recommended to refer to the specific user manual provided with the product for detailed and accurate installation instructions.