Answer

Mar 18, 2025 - 10:09 PM
To install the JUN B L G70 Performance Catback Exhaust System, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Before installation, ensure that you have the correct product for your vehicle.
2. When removing any genuine parts from the vehicle, follow the instructions provided by the vehicle manufacturer.
3. Handle the product with care and avoid dropping it or exposing it to impact.
4. If you are assembling the exhaust system with other company's products, check for any loss of efficiency or interference/friction before assembling them.
5. The installation sequence should be the reverse of the disassembly process.
6. After installation, check for any deformation on flanges or gas leakage.
7. Position the rubber hanger that supports the mufflers correctly.
8. Ensure that the body of the muffler or exhaust pipes do not touch the chassis, fuel tank, or bumper. Check for any overheating of electrical wirings, fuel pipes, air-conditioner pipes, oil-pressure hoses, brake pipes, or any other hoses before operating the vehicle.
After the installation, please keep in mind the following:
1. Be cautious when driving over speed bumps or on bumpy roads if your vehicle has been lowered.
2. The exhaust sound may vary between vehicles, even if they are the same model.
3. There may be a louder sound and a burning odor initially, which will subside as the sound absorption material spreads due to exhaust heat.
4. Do not separate the catalytic converter from the vehicle.
5. Ensure that the sound of the exhaust remains within the regulations.
For more detailed instructions and diagrams, please refer to the JUN B L G70 Performance Catback Exhaust System Instruction Manual provided with the product.
Add New Comment