Answer

Mar 18, 2025 - 10:03 PM
To install the VENETA 65101-40168-E Cordless Dual Blinds inside the window frame, follow these steps:
1. Start by attaching the blind brackets and extensions into the two ends of the raceway. Make sure the extension bolt locks into the raceway's dedicated hole.
2. Insert the top light guard holder horizontally into the groove at the backside of the raceway and turn 90 degrees to lock it in the raceway groove. Then insert the top light guard into the groove of the top light guard holder.
3. Fit the blind bracket cover over the blind bracket. Install the raceway into the window opening, securing the screws into the middle holes of the raceway first. This allows you to adjust the raceway left or right if required. Once in the correct position, secure the screws for all the holes. Ensure that the distance between the first xxxx and the window edge is at least 19mm.
4. The hem bars of both the front and back blinds should be at the same height.
Add New Comment