User Manual Q&AAnswer
Mar 18, 2025 - 09:50 PM
To install the STANLEY TA54 Pole Tamper, follow these steps:
1. Begin by assembling the handle. Attach the handle assembly (part number 07737) to the tamper body using the cap screws (part number 00144). Make sure the handle is securely tightened.
2. If your model includes a hose block (part number 35036), attach it to the tamper body using the cap screws (part number 02529).
3. Install the necessary decals on the tamper body. These decals include the STANLEY logo decal (part number 74707), CE decal (part number 28323), circuit type decals (part numbers 11206 and 11207), sound power decal (part number 88358), "Read the Manual" decal (part number 88348), importer decal (part number 88344), and GPM decal (part number 03783). Refer to the manual for the specific placement of each decal.
4. Attach the tool name tag (part number 74699) to the tamper body.
5. If your model includes a trigger, assemble the trigger components. This includes the roll pin (part number 00114), trigger (part number 04525), adapter (part number 00936), and hose whip (part number 56725 for model TA5410318). Refer to the manual for the specific assembly instructions.
6. If your model includes a trigger, attach the trigger assembly to the tamper body. This includes the male coupler (part number 03973), female coupler (part number 03972), O-rings (part number 07627), valve spool (part number 04098), and valve body assembly (part number 04897). Refer to the manual for the specific attachment instructions.
7. If your model is TA54603A, assemble the trigger components specific to this model. This includes the hose assembly (part number 35784), adapters (part number 00856), O-ring (part number 00026), selector xxxx (part number 10536), retaining ring (part number 16070), and inline valve body (part number 67007). Refer to the manual for the specific assembly instructions.
8. If your model is TA54603A, attach the trigger assembly to the tamper body. This includes the adapters (part number 00936), male coupler (part number 03973), female coupler (part number 03972), inline valve body (part number 67007), and valve spool (part number 67008). Refer to the manual for the specific attachment instructions.
9. If your model is TA54603A, attach the seal cap components. This includes the seal wiper (part number 56747), seal cap (part number 56749), O-ring (part number 01604), O-ring (part number 07626), and backup ring (part number 07224). Refer to the manual for the specific attachment instructions.
10. Attach the lower body components. This includes the tool retaining bolt (part number 00845), lock washer (part number 00825), tamper shoe (part number 00833 for kidney-shaped or 00840 for round), O-ring (part number 00178), valve assembly (part number 34684), reversing spool (part number 00819), O-ring (part number 06533), end cap (part number 14882), tube fitting (part number 01236), oil tube (part number 07738), and O-rings (part number 02030 and 02032 for trigger seal kits). Refer to the manual for the specific attachment instructions.
11. Attach the nose components. This includes the jam nut (part number 01795), rod wipers (part numbers 15016 and 14891), felt washer (part number 08434), retaining ring (part number 04902), seal washer (part number 14884), nose (part number 14883), O-rings (part numbers 01262, 00834, and 00823), piston cushion (part number 00823), thrust washer (part number 01038), roll pin (part number 01749), and O-rings (part numbers 02030 and 02032 for trigger seal kits). Refer to the manual for the specific attachment instructions.
12. Assemble the piston assembly components. This includes the piston (part number 14886), front sleeve (part number 01037), oil control seal (part number 29690), back sleeve (part number 00927), oil tube (part number 00806), and O-ring (part number 00940). Refer to the manual for the specific assembly instructions.
13. Attach the piston assembly to the tamper body. This includes the flow sleeve (part number 01036), outer tube (part number 01787), and O-rings (part numbers 02030 and 02032 for trigger seal kits). Refer to the manual for the specific attachment instructions.
Please note that these instructions are a general guide. For detailed and specific instructions, it is recommended to refer to the provided with the product.
Add New Comment