User Manual Q&AAnswer
Mar 18, 2025 - 04:49 AM
When installing the Q-TRAN QOM-eLED+AW-PS LED Power Supply for swimming pool use, there are several important considerations to ensure safety and compliance with regulations. Here is a step-by-step guide:
1. Mounting Options: The QOM-eLED+AW power supply must be installed as shown in the provided manual. If you need additional lengths of wire for connection in the secondary, please contact the factory for availability.
2. Wiring Installation: For exterior swimming pool installations, use the QOM-eLED+AW power supply. Follow the wiring instructions provided in the manual to connect the power supply to the LED lights.
3. Regulations: In accordance with NEC680 regulations in the United States, the following requirements must be met:
- The distance from the bottom of the terminal box to the ground should be no less than 4 inches.
- The vertical distance from the water surface of the swimming pool to the power supply should be no less than 8 inches.
- The horizontal distance from the water edge of the swimming pool to the power supply should be no less than 48 inches.
4. Power Supply Requirement: Only use an isolating low voltage power supply with an ungrounded output that is evaluated for swimming pool use. This ensures safety and compliance with regulations.
5. Fundamental Construction: For swimming pool installations, it is strongly recommended to use embedded installation to secure swimmers' safety and protect the lights from damage. Prepare a slot for implanting profiles on the mounting surface, with suggested slot sizes of 0.95" in width and 0.98" in depth.
6. CSA Requirements: The power supply must meet the following CSA requirements:
- It is suitable for indoor and outdoor use.
- It must be installed according to the National Electric Code and local codes and ordinances by a person familiar with the product and the hazards involved.
- Wear rubber shoes and work on a sturdy wooden or fiberglass ladder.
- Install the power supply in a location where it is not likely to be contacted by non-electricians.
- Account for all parts and destroy all packaging materials to avoid hazards to children.
- Keep the enclosure cover covered for safety.
For further assistance or specific inquiries, you can contact Q-TRAN at sales@q-tran.com or visit their website at www.q-tran.com.When installing the Q-TRAN QOM-eLED+AW-PS LED Power Supply for swimming pool use, there are several important considerations to ensure safety and compliance with regulations. Here is a step-by-step guide:
1. Mounting Options: The QOM-eLED+AW power supply must be installed as shown in the provided manual. If you need additional lengths of wire for connection in the secondary, please contact the factory for availability.
2. Wiring Installation: For exterior swimming pool installations, use the QOM-eLED+AW power supply. Follow the wiring instructions provided in the manual to connect the power supply to the LED lights.
3. Regulations: In accordance with NEC680 regulations in the United States, the following requirements must be met:
- The distance from the bottom of the terminal box to the ground should be no less than 4 inches.
- The vertical distance from the water surface of the swimming pool to the power supply should be no less than 8 inches.
- The horizontal distance from the water edge of the swimming pool to the power supply should be no less than 48 inches.
4. Power Supply Requirement: Only use an isolating low voltage power supply with an ungrounded output that is evaluated for swimming pool use. This ensures safety and compliance with regulations.
5. Fundamental Construction: For swimming pool installations, it is strongly recommended to use embedded installation to secure swimmers' safety and protect the lights from damage. Prepare a slot for implanting profiles on the mounting surface, with suggested slot sizes of 0.95" in width and 0.98" in depth.
6. CSA Requirements: The power supply must meet the following CSA requirements:
- It is suitable for indoor and outdoor use.
- It must be installed according to the National Electric Code and local codes and ordinances by a person familiar with the product and the hazards involved.
- Wear rubber shoes and work on a sturdy wooden or fiberglass ladder.
- Install the power supply in a location where it is not likely to be contacted by non-electricians.
- Account for all parts and destroy all packaging materials to avoid hazards to children.
- Keep the enclosure cover covered for safety.
For further assistance or specific inquiries, you can contact Q-TRAN at sales@q-tran.com or visit their website at www.q-tran.com.
Add New Comment