User Manual Q&AAnswer
Mar 18, 2025 - 04:36 AM
To defrost the Highland BD-232 Chest Freezer, follow these steps:
1. Turn the appliance control xxxx to the "0" position and unplug the power cord.
2. Remove all contents from the freezer and leave the lid open.
3. Locate the interior defrost drain on the inside floor of the cabinet and remove the cover.
4. The defrosted water will flow into the hole and out through the exterior defrost drain cap, which is located on the front of the cabinet. Gently pull out the exterior drain cap until the water hole is visible.
5. Twist the exterior drain cap so that the arrow points downward.
6. Place a bucket or pan under the drain cap to catch the defrosted water. Check the appliance regularly during defrosting to ensure that the water is not overflowing.
7. When all the water has been drained, twist the drain cap until the arrow is pointing upwards and then push it inward until it is flush with the cabinet.
8. Replace the cover on the interior defrost drain.
9. After defrosting is complete, set the temperature control to maximum for 2 to 3 hours before returning to the desired temperature setting.
Note: Never use electrical appliances during defrosting, and avoid using pointed or sharp objects to remove frost as this can damage the refrigerant lines.
Add New Comment