User Manual Q&AAnswer
Mar 18, 2025 - 04:25 AM
To connect the propane cylinder to the Eureka 2572193 Cooking Stove, follow these steps:
1. Perform a leak check outside in a well-ventilated area.
2. Make sure the stove is at least 1 meter (3.3 feet) away from any combustible materials or ignition sources.
3. Open the lid of the stove by releasing the latch.
4. Open the side windscreens and secure them by inserting the tabs into the latches on the lid.
5. Ensure that both control valves are closed firmly by rotating them clockwise.
6. Check that the gasket at the fuel input connection is in place and in good condition.
7. Connect the fuel regulator to the fuel input port located on the center of the right side of the stove by threading the coupling clockwise.
8. Connect the propane cylinder (sold separately) into the fuel regulator by threading it clockwise.
Note: Never operate the stove with the propane cylinder in an inverted position.
If you detect any gas leakage during the leak check procedure, do not attempt ignition. Remove the fuel source immediately and contact Customer Service. If no leak is found, the leak check is complete.
For more detailed instructions and safety precautions, please refer to the Eureka 2572193 Cooking Stove instructions manual.
Add New Comment