How to assemble and install the SERVER Serving Bar 4-Jar? (Server Serving Bar 4-Jar User Manual)

Answer

manuals.plus

Mar 18, 2025 - 04:13 AM

To assemble and install the SERVER 83600 Serving Bar 4-Jar, please follow the steps below:

1. Unpack all the components from the packaging and ensure that all parts are included as listed in the user manual.

2. Place the base of the serving bar on a flat and stable surface.

3. Attach the four jar holders to the base by aligning the holes on the holders with the corresponding holes on the base. Insert the provided screws through the holes and tighten them securely using a screwdriver.

4. Insert the jars into the jar holders. The jars should fit snugly into the holders to prevent any leakage. Ensure that the jars are clean and dry before use.

5. Connect the serving bar to a power source using the provided power cord. Make sure the power source is compatible with the voltage requirements specified in the user manual.

6. Turn on the serving bar by using the power switch located on the back or side of the unit. The serving bar should start operating and keeping the contents of the jars at the desired temperature.

7. Adjust the temperature settings if necessary. The user manual provides detailed instructions on how to adjust the temperature to meet your specific needs.

8. Fill the jars with the desired food or beverage items. The serving bar is designed to keep the contents at the desired temperature for extended periods.

9. Clean and maintain the serving bar regularly as instructed in the user manual to ensure optimal performance and longevity.

For any further assistance or troubleshooting, please refer to the complete user manual provided with the product or contact Server Products Inc. directly using the contact information provided.