User Manual Q&AAnswer
Mar 18, 2025 - 03:58 AM
Installation of the Paul Neuhaus 6781 SILEDA Ceiling Light is relatively straightforward. Here is a step-by-step guide:
1. Before starting the installation, ensure that the power supply to the ceiling light is switched off.
2. Carefully unpack the product and check that all the necessary components are included.
3. Locate the mounting bracket included in the package. This bracket will be used to attach the ceiling light to the ceiling.
4. Determine the desired location for the ceiling light and mark the position on the ceiling.
5. Drill holes in the ceiling at the marked positions, following the instructions provided in the manual. Make sure the holes are suitable for the included dowels.
6. Insert the dowels into the drilled holes.
7. Attach the mounting bracket to the ceiling using screws, ensuring it is securely fastened.
8. Connect the electrical wires from the ceiling to the corresponding wires on the ceiling light. Follow the wiring diagram provided in the manual for proper connection.
9. Carefully lift the ceiling light and align it with the mounting bracket. Insert the screws provided into the holes on the ceiling light and tighten them to secure the light in place.
10. Once the is securely attached, restore the power supply and test the functionality of the ceiling light.
Please note that these instructions are a general guideline and it is always recommended to refer to the specific instruction manual provided with the product for detailed and accurate installation steps.
Add New Comment