User Manual Q&AAnswer
Mar 18, 2025 - 03:56 AM
To assign the remote control to the light on the Paul Neuhaus 14643 Flar-Air Ceiling Fan, please follow these steps:
1. Turn on the light using the wall switch.
2. Within 6 seconds of turning on the light, press the button on the remote control and hold it down for 2 seconds.
3. If the light flickers 3 times, it means the teaching process was successful, and the remote control is now assigned to the light.
4. If the light does not flicker, turn off the light for 10 seconds and repeat the above process.
5. Once the light has been assigned, it can only be operated with this specific remote control.
Please note that these instructions are based on the information provided in the Paul Neuhaus 14643 Flar-Air Ceiling Fan instruction manual.
Add New Comment