How do I insert the SIM and micro SD cards into the SmartVision3 mobile phone? (SmartVision3 Mobile Phone User Guide)

Answer

manuals.plus

Mar 18, 2025 - 03:54 AM


To insert the SIM and micro SD cards into the SmartVision3 mobile phone, follow these steps:



1. Open the SIM tray: Lay the phone flat with the screen facing up. Insert the SIM extraction tool provided into the SIM tray eject hole on the left side of the phone. Push the tool all the way in until the SIM tray pops out.



2. Inserting a SIM card and a micro SD card (optional): Position the micro SD card in the first compartment of the tray, with the metal side down and the beveled corner down. Then, position the SIM card in the second compartment of the tray, with the metal side down and the beveled corner at the bottom right. Gently reinsert the SIM tray all the way into the slot, making sure it is oriented horizontally.



3. Inserting two SIM cards: Position the first SIM card in the first compartment of the SIM tray, with the metal side down and the beveled corner at the bottom right. Repeat the same operation for the second compartment of the SIM tray. Gently reinsert the SIM tray all the way into the slot, making sure it is oriented horizontally.



Note: The position of the SIM cards in the tray does not matter. The configuration and management of the SIM cards can be done through the phone's "Settings" in the "Network and Internet" section.



Please refer to the SmartVision3 Mobile Phone User Guide for more detailed instructions and illustrations.