User Manual Q&AAnswer
Mar 18, 2025 - 03:53 AM
Installation of the Paul Neuhaus 6231 Paan LED Ceiling Light is a relatively straightforward process. Here is a step-by-step guide based on the instruction manual:
1. Before starting the installation, make sure to turn off the power supply to the existing light fixture at the circuit breaker.
2. Remove the existing light fixture from the ceiling by unscrewing the screws or nuts that hold it in place. Carefully disconnect the wiring from the fixture.
3. Take the Paul Neuhaus 6231 Paan LED Ceiling Light out of its packaging and inspect it for any visible damage. If you notice any damage, contact the manufacturer for assistance.
4. Attach the mounting bracket included with the light fixture to the ceiling junction box using the screws provided. Make sure the bracket is securely fastened.
5. Connect the wiring from the ceiling to the wiring of the light fixture. Match the corresponding wires (usually black to black, white to white, and green or copper to green or copper). Use wire connectors to secure the connections and ensure proper insulation.
6. Carefully tuck the connected wires into the ceiling junction box and attach the light fixture to the mounting bracket. Align the xxxx holes on the fixture with the bracket and secure them using the screws provided.
7. Once the fixture is securely attached, turn the power supply back on at the circuit breaker and test the light by flipping the switch.
8. If the light does not turn on or there are any issues, refer to the troubleshooting section of the instruction manual or contact the manufacturer for further assistance.
Please note that this is a general guide and it is important to refer to the specific instruction manual provided with the Paul Neuhaus 6231 Paan LED Ceiling Light for detailed and accurate installation instructions.
Add New Comment