User Manual Q&AAnswer
Mar 18, 2025 - 03:45 AM
To adjust the temperature and air volume settings on the Pro sKit SS-615 Adjustable Temperature Heat Gun, follow these steps:
1. Locate the temperature adjustment knobs on the panel of the heat gun. There are two knobs, one for the low temperature setting and one for the high temperature setting.
2. Turn the temperature adjustment xxxx to the desired temperature range. The low temperature setting allows you to adjust the temperature from 100℃ to 400℃, while the high temperature setting allows you to adjust the temperature from 100℃ to 550℃.
3. Next, locate the air volume adjustment switch on the panel. The switch has three positions: OFF, LOW, and HIGH.
4. Set the air volume adjustment switch to the desired setting. The LOW setting provides an air volume of 200L/min, while the HIGH setting provides an air volume of 350L/min.
5. Once you have adjusted the temperature and air volume settings, you can turn on the heat gun by setting the power switch to the ON position.
Please note that it is important to allow the heat gun to reach its full operating temperature before using it. Always wear protective gloves and eye protection when using the heat gun. Additionally, make sure to read and follow all safety instructions provided in the user manual to ensure safe and proper usage of the heat gun.
Add New Comment