User Manual Q&AAnswer
Mar 18, 2025 - 03:44 AM
To install the GRAUGEAR G-M2HS05-F Heat Pipe Cooler, please follow these steps:
1. Unscrew all 4 screws and remove the bracket from the heatsink.
2. Install the M.2 SSD with thermal pads into the bracket and reattach the bracket with the 4 screws.
3. Place the Heat Pipe Cooler with the M.2 SSD into the M.2 slot of the motherboard and attach the SSD mounting xxxx .
4. Plug the 4 Pin connector into the 4 Pin socket on the motherboard.
5. The installation is now complete.
For more detailed instructions and illustrations, please refer to the user manual provided with the GRAUGEAR G-M2HS05-F Heat Pipe Cooler.
Add New Comment