User Manual Q&AAnswer
Mar 18, 2025 - 03:43 AM
To adjust the sensitivity of the LEDISONS LDM90-2-WIT IR Motion Sensor, please follow these steps:
1. Check if there is any hindrance in front of the detector that may affect its ability to receive signals.
2. Ensure that the ambient temperature is not too high, as this can impact the sensor's sensitivity.
3. Make sure that the induction signal source is within the detection field of the sensor.
4. Verify that the installation height of the sensor corresponds to the height required in the instruction manual.
5. Confirm that the moving orientation is correct, as incorrect orientation can affect the sensor's sensitivity.
If you have checked all of the above and are still experiencing poor sensitivity, please consult the LEDISONS LDM90-2-WIT IR Motion Sensor manual for further troubleshooting steps or contact a professional electrician for assistance.
Add New Comment