User Manual Q&AAnswer
Mar 18, 2025 - 03:38 AM
To install the Nania F11 Car Seat in your vehicle, please follow these steps:
1. Ensure that your vehicle has a forward-facing seat with a 3-point seat belt.
2. Place the car seat against the back seat of the vehicle.
3. Raise the adjustable headrest to its highest position.
4. Feed the diagonal strap of the seat belt through the headrest guide.
5. Sit your child in the car seat, making sure their back is fully in contact with the back of the car seat.
6. Pull and fasten the vehicle seat belt.
7. Pass the diagonal strap of the belt under the armrest opposite the belt guide used.
8. The waist strap of the belt should pass under both armrests.
9. Lower the adjustable headrest and adjust it to the height of your child. It should surround your child's head and guide the diagonal belt over their shoulder without extending onto their neck.
10. Tighten the vehicle seat belt, ensuring it is properly tightened and not twisted. Make sure it is not positioned at the level of your child's neck.
11. To remove your child from the car seat, simply unbuckle the seat belt and place it at the side of the car seat. The belt will remain suspended from the headrest belt guide.
Please note that these instructions are a summary and it is important to refer to the Nania F11 Car Seat Instruction Manual for complete and detailed installation guidelines.
Add New Comment