User Manual Q&AAnswer
Mar 18, 2025 - 03:31 AM
To assign the remote control to the LeuchtenDirekt 997592 Flat Air light, please follow the instructions below:
1. Turn on the light using the wall switch.
2. Within 6 seconds, press the button on the remote control and hold it down for 2 seconds.
3. If the light flickers 3 times, it means the teaching process was successful, and the remote control is now assigned to the light.
If the light does not flicker after pressing the button on the remote control, please try the following steps:
1. Turn off the light for 10 seconds.
2. Repeat the process mentioned above by turning on the light using the wall switch and pressing the button on the remote control within 6 seconds, holding it down for 2 seconds.
3. If the light flickers 3 times this time, it means the teaching process was successful.
Once the light has been assigned to the remote control, it can only be operated using that specific remote control.
If you have any further questions or need assistance, you can contact LeuchtenDirekt GmbH's customer service at +49(0)2922 9721 9290 or via email at Kundenservice@neuhaus-group.de. You can also visit their website at www.leuchtendirekt.de for more information.
Add New Comment