Answer

Mar 18, 2025 - 03:28 AM
To connect the inverter to a battery, follow these steps:
1. Make sure the inverter and its power source are turned off.
2. Connect the black DC cable to the negative terminal of the battery and to the black head post of the inverter.
3. Connect the red DC cable to the positive terminal of the battery and the redhead post of the inverter.
4. Insert the power plug of the equipment you'd like to use into the inverter's output socket.
5. Switch on the inverter to start using the unit.
Please ensure that all connections are solid and reliable. Improper cable connections may result in overheating, as well as post head and lug damage, and can reduce battery time.
Note: Before plugging in any appliance/equipment, make sure both the inverter and the appliance are turned off. When the inverter's LED glows green, you can switch on connected devices and appliances one by one. If the LED light is red, it means the inverter is overloaded. Restart the inverter or disconnect certain appliances to reduce the load.
For a visual representation, please refer to the installation diagram provided in the user manual.
Add New Comment