Answer

Mar 18, 2025 - 03:22 AM
To adjust the depth of drive on the RYOBI P320 18 GA Brad Nailer, follow these steps:
1. Remove the battery pack from the tool.
2. Locate the depth of drive adjustment dial, which is labeled "M" on the tool.
3. Turn the depth of drive adjustment dial left or right to change the driving depth. Turning it clockwise will increase the depth, while turning it counterclockwise will decrease the depth.
4. Reinstall the battery pack and reactivate the tool by pressing the worklight grip switch.
5. Drive a test nail into a scrap piece of wood to check the depth. If the depth is not to your liking, repeat steps 1-4 until the desired depth is achieved.
Note: It is advisable to test the depth on a scrap workpiece to determine the required depth for the application. Harder materials and longer nails may require more force to drive the nail, so adjust the depth accordingly.
Add New Comment