User Manual Q&AAnswer
Mar 18, 2025 - 03:20 AM
To connect the ClearOne Unite 160 4K Camera to power, follow these steps:
1. Make sure the connections are correct by referring to the diagram provided in the user manual.
2. Connect the camera to a power source.
3. Once connected, the LED light on the front panel of the camera will indicate that it is powered on.
4. The camera will go through an initialization process where it will pan-tilt to the maximum position of the top right and then return to the center.
5. Note that if the position preset 0 has been stored, it will be called up after initialization.
Please refer to the user manual for more detailed instructions and illustrations on connecting the camera to power.
Add New Comment