User Manual Q&AAnswer
Mar 18, 2025 - 02:44 AM
To set up the , follow these steps:
1. Take the device out of the box and remove all packaging materials.
2. Place the packaging materials in the box or dispose of them safely according to the recycling instructions on the packaging.
3. Read and understand all warnings and safety instructions provided in the instruction manual.
4. Connect the external power adapter to the appropriate outlet.
5. Connect the turntable to a suitable socket.
6. Turn on the turntable using the ON/OFF button.
7. Install the dust cover on the hinges at the top of the unit.
8. Attach the platter to the platform, making sure to place the side marked "top" near the opening at the top.
9. Place the vinyl mat on the turntable platter.
10. Insert the headshell into the end of the tone arm and tighten the lock nut to hold it securely.
11. Add weight to the tone arm by turning the counterweight to the graduation mark.
12. Turn the dial to zero.
13. Turn the weight and dial anti-clockwise to position 1. This ensures the weight is correctly adjusted.
14. If necessary, adjust the anti-skating control according to the instructions in the manual.
15. Slide the counterweight into the tone arm and xxxx it (anti-clockwise) to the rear end of the tone arm. Each full turn of the graduated ring corresponds to approximately 5.0 grams (+/-0.5 grams).
16. For the Audio-Technica AT-91 cartridge, turn the counterweight anti-clockwise until the graduated ring reaches the graduation at the back end of the tone arm.
17. Hold the counterweight with one hand and turn the graduated ring to 0 on the scale of the arm, making sure not to rotate the counterweight.
18. The Audio-Technica AT-91 cartridge supplied requires approximately 2.5 grams of tracking force. To achieve this tracking force, turn the counterweight anti-clockwise to position 1 on the graduated ring. If you experience any skipping issues, turn towards 1.5–2.
19. There is a weight tolerance of approximately +/-0.5g. If necessary, turn the counterweight anti-clockwise to increase the tracking force or clockwise to reduce it.
20. Adjust the balance of the arm by turning the counterweight one way or the other until the tone arm is parallel to the record on the platter and not tilting toward the counterweight or headshell.
21. Set the anti-skating xxxx to 0.
22. Your turntable is now set up and ready to use.
Please refer to the instruction manual for more detailed information and illustrations on the setup process.
Add New Comment