User Manual Q&AAnswer
Mar 18, 2025 - 02:39 AM
To connect the Q-TRAN DMX-US3 Controller to the LED lighting system, please follow the steps below:
1. Install the junction box into the wall: Begin by installing the junction box into the desired location on the wall where you want to mount the controller.
2. Pry the baseplate: Use a flathead screwdriver to gently pry the baseplate of the controller. This will allow you to access the mounting holes.
3. xxxx the baseplate to the junction box: Align the xxxx holes on the baseplate with the holes on the junction box and firmly xxxx the baseplate to the junction box. Ensure that it is securely attached.
4. Connect all components: Connect all the necessary components of your LED lighting system, including the LED lights and any additional accessories, following the manufacturer's instructions.
5. Power adapter placement: Place the power adapter into the junction box, ensuring that it is securely connected.
6. Connect DMX GND to earth GND: Make sure to connect the DMX GND (ground) of the controller to the earth GND of your electrical system. This step is important for proper grounding and safety.
7. Attach the touch panel: Snap the upper portion of the touch panel into the baseplate, aligning it properly, and then snap the bottom portion into place. Ensure that the touch panel is securely attached to the baseplate.
8. Connect to power supply: Finally, connect the Q-TRAN DMX-US3 Controller to the power supply. Make sure to follow the power supply instructions and guidelines for a safe and proper connection.
For any further assistance or specific inquiries, you can reach out to Q-TRAN directly via email at sales@q-tran.com or visit their website at www.q-tran.com.
Add New Comment