User Manual Q&AAnswer
Mar 18, 2025 - 02:34 AM
To connect your Kensington SD2600T Thunderbolt 4 Dual 4K Nano Docking Station to your computer, follow these steps:
1. Make sure your computer has a Thunderbolt 4 port. The docking station is compatible with Thunderbolt 4 and Thunderbolt 3 ports.
2. Connect the docking station to your computer using the Thunderbolt 4 cable provided. Plug one end of the cable into the Thunderbolt 4 port on the docking station and the other end into the Thunderbolt 4 port on your computer.
3. Once connected, the docking station will start to power on. You may see a notification on your computer indicating that a new device has been connected.
4. Connect your peripherals and displays to the docking station. The docking station features a variety of ports, including USB-A, USB-C, HDMI, DisplayPort, and Ethernet. Use the appropriate cables to connect your devices to the corresponding ports on the docking station.
5. After connecting your devices, your computer should recognize them automatically. If any drivers or software updates are required, your computer may prompt you to install them.
6. Once everything is connected and recognized, you can start using your peripherals and displays through the docking station.
For more detailed instructions and troubleshooting tips, refer to the user manual provided with the Kensington SD2600T Thunderbolt 4 Dual 4K Nano Docking Station.
Add New Comment