How do I install the NIMASO FC.001.162 Screen Protector for iPad? (NIMASO Screen Protector iPad User Manual)

Answer

manuals.plus

Mar 18, 2025 - 02:28 AM

To install the NIMASO FC.001.162 Screen Protector for iPad, please follow the steps below:

1. Clean the screen: Use the Wet Wipe to clean the screen and remove any remaining liquid with the Microfiber Cloth to keep it dry.

2. Remove dust: Use the Dust Absorber Sticker to remove any dust particles on the screen to avoid bubbles during installation.

3. Fix the Alignment Frame: Place the Alignment Frame on your device, making sure the side labeled "TOP" is facing up.

4. Thoroughly clean the screen: After attaching the Alignment Frame, use the Dust Sticker again to thoroughly clean the screen before proceeding.

5. Peel off the protective film: Peel off the protective film from the glass screen protector.

6. Align and apply the screen protector: Align the screen protector with the top of the frame and lower it onto the device. Gently press the device screen while removing the Alignment Frame.

7. Remove bubbles: If there are any bubbles, use the Microfiber Cloth to eliminate them by pushing outwards from the center.

Note: Avoid touching the sticky side of the screen protector with your hands or other objects.

For further assistance, you can contact NIMASO Customer Support using the provided contact methods such as LINE, email, or the message form on Amazon. They will provide free exchange or refund for defective products within the warranty period of 36 months from the date of the order. Make sure to include the order number and photos showing the defective condition when contacting customer support.

Please note that the warranty only applies to products purchased from the NI MASO Official Store, and the screen protector is specifically designed for the listed iPad models on the NI MASO Official Store product page. Keep the product away from direct sunlight, hot and humid places, and store it out of reach of children.