Answer

Mar 18, 2025 - 02:18 AM
To install and set up the MiBOXER PIR1-ZB Mi Light Subordinate Pir Sensor, follow these steps:
1. Battery Installation:
- Purchase a CR123A 3V battery (sold separately).
- Long press the "SET" button on the sensor for about 5 seconds until the indicator flashes quickly.
- Open the "Tuya Smart" app and click on the connected Zigbee Gateway.
- Click on "Add subdevice".
- Select "Indicator is flashing quickly" option.
- The app will search for devices and add the sensor successfully.
2. App Connection:
- Ensure you have a Zigbee 3.0 gateway and have added it to the Tuya Smart app (refer to the gateway manual for instructions).
- Follow the battery installation steps mentioned above.
- Open the "Tuya Smart" app and click on the connected Zigbee Gateway.
- Click on "Add subdevice".
- Select "Indicator is flashing quickly" option.
- The app will search for devices and add the sensor successfully.
3. Installation Direction:
- Install the sensor in an area where people usually cross over, with a distance of at least 2m from the ground.
- Avoid installing it near appliances like air conditioners, fridges, ovens, etc., as they can affect the temperature readings. Also, avoid direct sunlight exposure.
- Remove the sticker on the back base and fix the base holder to a suitable position.
4. Attention:
- The indicator will flash once and send a signal when the sensor activates and detects motion.
- The indicator will not light up if the sensor detects continuous moonlight.
- If you don't plan to use the sensor for an extended period, remove the battery and store it in a dry and safe place.
- Avoid using the sensor near metal or strong electromagnetic areas, as it can affect the communication distance.
Add New Comment